home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Family Fun
/
Family Fun.iso
/
tools
/
vpic43.exe
/
README.1ST
< prev
next >
Wrap
Text File
|
1991-05-01
|
2KB
|
29 lines
Dear User,
Print VPIC.TXT using 17 chars/inch and 8 lines/inch to get a handy one page
quick reference guide for VPIC. See VPIC.DOC revision history for what's new.
The CONFIG program allows you to configure VPIC from a menu. Just make sure
VPIC.EXE, CVPIC.EXE, CONFIG.EXE, and all the configuration files (.cfg
extension) are in the current directory. Then enter CONFIG and you will get a
menu (similar to the VPIC menu) of all the configuration files. The menu also
lists the contents of the currently highlighted file. You can move thru the list
of files using the cursor keys, or by pressing a letter key jump to the next
filename starting with that letter (or number). Just look for a file which
matches the parameters for your board, and press ENTER to configure VPIC using
that configuration file. ESCape ends the CONFIG program without configuring
VPIC. If none of the supplied files match your board, copy the closest one to a
new filename (with extension .cfg) and use a text editor to modify it to your
boards requirements. See CONFIG.DOC for a list of supported VGA chips and a
typical board on which it is used.
The WHICHVGA program will try to identify your VGA chip and the amount of
display memory you have. It isn't foolproof, but works most of the time.
See CONFIG.DOC for a comprehensive explanation of the configuration process and
.cfg file format. See VPIC.DOC for all the other features of VPIC.
Enjoy,
Bob Montgomery